Mokhoa oa ho tlosa masala a matla a taimo: tataiso e felletseng bakeng sa mefuta eohle ea theipi

Kenyelletso
Tepe e sebelisoa haholo bophelong ba letsatsi le likonyana, empa likopanong tsa indasteri, empa likopanong tse thata tsa liindasteri tse setseng li ka ferekanya. Tataiso ena e fana ka mekhoa e thehiloeng ho hloekisa bakeng sa mefuta e fapaneng ea theipi (mohlala,Theipi ea masking, PVC, Vhb)Ho thusa basebelisi ho tlosa masala hantle.

1. Lisosa tsa masala a theipi

1.1 Sebopeho sa ho khathatsa

Masala a mantlha a na le sethepu se khomarelang le litšila. Liphetoho tsa mocheso le mongobo nakong ea lits'oa li ka etsa hore meriana e qhibilihe kapa e thata, e thatafalloa ke mathata a ho tlosoa.

1.2 Lintho tse fapa-fapaneng tsa thepa

Lihlopha tse fapaneng tsa theipi (pampiri, polasetiki, foam) e hloka mekhoa e khethehileng ea ho hloekisa ka lebaka la ho fapanyetsana maikutlo a khang. Ka tlase ho na le litharollo tse tsamaeang ka tatellano ea mefuta e tloaelehileng ea tepe.

2. Litharollo tse hlakileng tsa ho hloekisa

2.1Theipi ea masking

(Sheba leqephe la rona [le masking])
Litšobotsi: Ho ipapisitse le pampiri, e loketseng ts'ireletso ea pente le li lokisa tsa nakoana.
Boemo ba boiketlo ba morao: Thepa e tšesang e nang le likotoana tsa fiber ea pampiri.
Mokhoa oa ho hloekisa:

• Bosalla bo phahameng ka metsing a futhumetseng bakeng sa metsotso e 5.
• Ka bonolo le lesela la microfiber; Sebelisa li-isopropyl joala ba maqheka a manganga.

2.2PVC theipi ea motlakase

(Sheba leqephe la li-lap tsa [PVC TEP]
Litšobotsi: Khomaretso e thehiloeng botebong ba litho tsa polasetiki, e sebelisetsoang ho kenya mahlo.
BOTHATA: Li-oxid tse khomarelang ka nako e telele, ho tlama libaka tsa bokaholimo.
Mokhoa oa ho hloekisa:

• Etsa kopo Acetone kapa 90% joala ho feta masala a bonolo.
• Scatupe ka bonolo ka sbatula ea polasetiki ka lehlakoreng le leng.

2.3 Vhb (tlamo e phahameng haholo) tepe e mahlakoreng habeli

(Sheba leqephe la li-vhb tsa vhb tepe])
Litšobotsi: 3m acrylic foam thepe bakeng sa polokelo ea tšepe e sa feleng ea tšepe / khalase ea khalase.
Protocol protocol:

• Mocheso o nang le moriri o mongata (60 ° C /100 ° F) bakeng sa metsotsoana e 10.
• Peel butle butle; qhibiliha ho tloha khapiso e setseng e nang le solvent ea li-citrus (mohlala, goo o ile).

2.4Duct thape

Litšobotsi: Ho ba lesela le tšehelitsoeng ke tšebelisano e mabifi ea rabara.
Ho lokisa kapele:

• Freeze Reserjeue e nang le Ice Pack bakeng sa metsotso e 10.
• Scrape Bulk Redie o sebelisa moeli oa karete ea mokitlane.

3. Mekhoa ea ho hloekisa hohle

3.1 Foko ea metsi a futhumetseng

Molemo ka ho fetisisa: Khalase, ea Ceramic, kapa e sa keneleng metsi.
Mehato:

1. Kopanya metsi a futhumetseng ka sesepa sa sesepa (1: 10 karolelano).
2. Sok e amehileng sebakeng sa metsotso e 5-10.
3. Hlakola ka lesela la mahala la litlokela ho sebelisa mekhabiso e chitja.

3.2 Joala / Solvent kalafo

Bakeng sa: Oxider kapa e phekotsoeng.
Tšireletseho:

• Sebetsa libakeng tse nang le moea.
• Roala liatlana tsa nitile ha li sebetsana le Acetone.

3.3 Khoebo ea Khoebo e khomaretsoeng

Likhetho tse holimo: Goo o felile, de-solv-it.
Kopo:

• E fafatsa ka mokhoa o ts'oanang.
• Emela metsotso e 3-5 pele o hlakola.
• Pheta bakeng sa phetoho e boima.

4. TLHOKOMELISO E BONAHALA

1. TLHOKOMELISOKamehla liteko tse hlahang libakeng tse patehileng pele.
2. Khetho ea Tool:

• Li-scrapers tsa polasetiki: E bolokehile bakeng sa libaka tse bobebe.
• Nylon gshes: e sebetsa bakeng sa lisebelisoa tsa thuto tse ngotsoeng.

3. Tlhokomelo:

• Hloekisa Indasteri Indestritions Khoeli le Khoeli ho Sireletsa Khomo ea Khaola.

4. Ho lahla eco-botsoalle:

• Bokella litšila tsa solvent ka thoko; ha ho mohla e tšollelang lits'ila.

Sephetho
Lisebelisoa tsa litheipi le likhato tsa bona ke senotlolo sa ho tlosoa ha masala a sebetsang. Bakeng sa litlhaloso tsa mahlale le maemo a kopo ea litheipi tsa setsebi, etela rona [Setsi sa Lihlahisoa]. Ho ba le phephetso e ikhethang ea masala? Abelana le boiphihlelo ba hau ho litlhaloso - re tla thusa ho etsa tharollo ea hau!